Understand stock quantities and record adjustments
Use Inventory → Stock to see what you hold, what you can use and why some stock is unavailable. When a quantity is wrong, record the correction against the right product and location.
To receive a supplier delivery, use its purchase order. To move stock, use bins and moves or a transfer. For a physical count, use Stock Scan counting.
Read the Stock table
Each row is a product. Expand it to see one row per location. A product's total adds up its stock locations, and a location row shows where a change applies. Stores that share one stock pool show the same stock, so don't add their numbers together.
| Column | What it shows |
|---|---|
| Status | The stock position. See the statuses below. |
| On hand | The stock you physically hold, including stock that is damaged or set aside. |
| Unavailable | On hand minus Available. Select it to see the breakdown. |
| Available | What you can sell or use now. It can be negative. |
| Suggested | The replenishment suggestion. See replenishment. |
| Planned | The quantity in your Order plan. Planned stock isn't on hand yet. |
You can also add these columns, which are hidden by default:
- Image, a product thumbnail.
- Type, the material type.
- Inbound, stock that is ordered or on its way. It isn't available until it's received.
- Stockout in, the time until the product is expected to run out.
To sort, select a column heading. If the list is too long to sort, narrow it with the filters first: Stock pool, Low stock only, Not baselined only, No supplier or Below minimum.
Select rows to use Add selected to order plan or Link to supplier….
See why stock is unavailable
Select a location's Unavailable figure. The breakdown can include:
| Line | Meaning |
|---|---|
| Damaged, Held for a quality check, Quarantined | Stock you set aside by condition. |
| Unreconciled | Stock shipped from a location when no bin held it. See "Clear unreconciled stock" below. |
| Held by other apps | Stock another app (such as BundlesIQ) reserved in Shopify. Zapstra shows it for your information and never sells it. Only that app can release it. |
| Committed, reserved and safety stock | Stock promised to orders, transfers or production, plus your safety stock. |
Stock in a bin on Hold is also unavailable. See bins and moves.
Safety stock is a planning target, not stock that is physically set aside. Change safety stock lowers or raises it.
For example, a location has 72 on hand. It has 18 committed or reserved, 2 damaged and 4 safety stock. Available is 48 and Unavailable is 24.
Statuses
| Status | Meaning |
|---|---|
| In stock, Low stock, Out of stock | The stock position against your stock targets. |
| Oversold | On hand is below zero. |
| Deficit | Available is below zero while on hand isn't. More is promised than you can supply. |
| Not baselined | No starting quantity has been recorded yet. It isn't a count of zero. See opening inventory. |
| Untracked | The product isn't stock-managed. |
Record an on-hand change
Use this for a confirmed loss, a found item or a corrected count. You can also do it from Materials → the material → Stock Levels.
- Expand the product and find the location row.
- Select the edit control beside On hand.
- Choose Set to to enter the new total, or Adjust by to enter the size of the change. Check Current on hand first.
- Enter the quantity in the material's stock unit and choose a Reason. With Adjust by, the reason sets the direction: Shrinkage (−), Damage (−), Theft (−) and Write-off (−) reduce stock; Write-on (+) and Other (+) increase it. Enter the amount without a minus sign.
- For a decrease, choose the bin in Take from bin if asked.
- Add a note that explains the change.
- If you see "This also starts syncing stock for {location} to your store", read Start managing inventory in Zapstra first. From then on, Zapstra writes this location's stock levels to Shopify.
- Select Record stock change.
Check the result: the location shows the new quantities, and the change appears in Activity.
If the goods still exist but can't be used, set them aside by condition (next section) instead of reducing on hand.
Set aside, release or dispose of stock
Select the edit control beside Available. Choose an action, a quantity and a condition (damaged, held for a quality check or quarantined), then select Record stock change:
- Add to sets stock aside. On hand stays the same and Available goes down.
- Release from puts set-aside stock back into use. Available goes up, unless the bin is on hold.
- Dispose from removes stock that is already set aside. On hand goes down; Available doesn't change.
The location's actions menu also offers Release from a quality check, Mark as damaged and Write off stock. A write-off removes stock from on hand. Check Which stock and How much carefully, because a write-off can't be undone from that dialog. To undo a recorded movement, use Reverse in Activity.
Clear unreconciled stock
A location shows Unreconciled {count} when an order shipped from it and no bin held the stock. To clear it:
- Select Confirm count on the badge.
- Count the material in every bin listed, and enter each figure in Counted. Enter 0 for an empty bin.
- Select Save count.
Check the result: "Count saved." appears and the badge clears. Recording a receipt for the missing stock also clears it.
You can't confirm a count on the web for lot-tracked materials or materials stocked in more than one unit; count those in Stock Scan.
Locations not managed in Zapstra
A location marked Not managed on the Locations page has no stock editors on this page, because another app manages its stock there. To work on it in Zapstra, turn management back on for it in Locations and stock pools.
If something goes wrong
| What you see | What to do |
|---|---|
| Stock recorded then "Store sync did not start." | The stock change is saved, so don't enter it again. Fix the stated reason, then select Start syncing. See sync troubleshooting. |
| "We could not check what this stock is held for." | The breakdown didn't load. Refresh before deciding anything from it. |
| "{location} isn't managed in Zapstra, so Zapstra can't change stock there." | Select Locations and turn management back on, or make the change in the app that manages that location. |
| "Stock changed since you opened this. Check and save again." | Reload, recount if needed, and save again. |
| "This material is tracked by lot. Count it in Stock Scan." | Count it with Stock Scan. |
If a request times out, see troubleshooting before you try again.