Run production tasks and complete a build
Record component picks and output placement on a released production order, then complete it with the quantities you actually made and used. Completion consumes the components and adds the finished stock.
Find the work
Open Production and select the order, or open Work queue and follow a task to its order. Check the output material, BOM, planned quantity, location and any Transfer to location.
A released order shows Pick components and Place output under Work. Select Start production when the run begins; the order becomes In progress. If the order is still a draft, see production planning.
Your team can also do these tasks in Stock Scan.
Pick components
- In Pick components, find the component. The line shows "{picked} of {planned} {unit} picked".
- Enter the Bin you took it from. On the web this field currently needs the bin's system ID, not its printed code; if you don't have it, pick in Stock Scan or contact Support.
- Enter the Quantity taken.
- Select Record pick.
Check the result: the picked quantity goes up by what you entered. For a second pick, enter only the extra quantity.
Place output
- When the output is on the shelf, open Place output.
- Enter the Bin (system ID, as above) and the Quantity placed.
- Select Record placement.
Check the result: the placement is recorded. The finished stock is added when you complete the order, not now.
Complete the order
- On the In progress order, select Complete Production.
- Enter Output quantity and Scrap quantity. Output includes scrap. For example, 10 made with 1 scrapped is output 10, scrap 1, leaving 9 in stock. The form starts at the planned quantity and zero scrap, so change them to what happened.
- If you scrapped anything, choose a Scrap reason and add a note if useful.
- Next to Adjust component usage?, select Show and enter what each component actually used.
- Select Complete Production.
Check the result: the order shows Completed, with each component's Actual qty and any Excess over plan. Stock at the production location (or the transfer destination) is updated. If the location is managed in Zapstra, Zapstra keeps Shopify up to date.
Review scrap
A completed order with scrap gets a Scrap review task under Work.
- Check the scrapped quantity.
- Choose Confirm as scrap or Returnable — needs a stock adjustment.
- Add a Note and select Record disposition.
Returnable — needs a stock adjustment records your judgement only. To put the stock back, record an adjustment.
If something goes wrong
| What you see | What to do |
|---|---|
| Applying completion… | Wait, then refresh the order. Don't complete it again. |
| The last completion was not applied | A component was short. Fix the stock or the actual quantities, then complete again. |
| A completion with scrap is refused | Choose a Scrap reason. |
| A pick is refused for stock or bin | Check the bin, its stock and existing picks. Stock claimed for other work can't be picked. |
| Work could not be loaded | Reload the page. |
For a completed order that needs fixing, see Correct or reverse completed production. For a timeout, check the order before you try again. See troubleshooting.